If your Viking stove burners aren’t burning properly, it is a good thing to know that most of the time, it doesn’t need a significant repair. You may simply have to reconnect loose wires, replace a burner or do a little cleaning. All this can be done without the appeal of an expert.
Here are some of the possible reasons why your Viking stove burners aren’t operating properly:
Gas Stove Burners
If a solitary burner isn’t lighting up or firing up your gas stove, it is likely for one of two primary reasons: an inability to ignite or an absence of gas flow. You should investigate the issue first yourself, before contacting a Viking gas stove repair. If the burner does light up but the fire is more yellow rather than blue, the gas tube or the burner ports might be obstructed by food particles and debris. If it does not light by any means, ports or the cylinder might be clogged. Other reasons might be a faulty ignition switch or an electrode malfunctioning.
Electric Stove Burners
On an electric stove, a solitary burner that will not get hot could be loose, near its expiration or damaged. Electric coil burners plug into the highest point of the stove and can come loose because of frequent use or when it has been knocked off, unknowingly. If the burner falls flat, it might require a replacement.
Frail Burner Flame
If the burner fire on top of the oven has all the earmarks of burning weakly, the possible culprit might be obstructed burner flame openings. Bad quality flares could likewise be brought about by too little air getting into the burner or too little gas. You should call in a technician immediately if you speculate the issue is something more serious. If that isn’t the case, you can simply adjust the gas hose for air and gas issues or the air shutter.
Dirty And Oily Surface
Consistently clean and wipe down the cooking surface. Ordinary cleaning of the burners guarantees more productivity, which uses lower fire or less gas. It also prevents impediments and clogs from taking form.
Put Your Safety First
You need to consistently play it safe when you are researching the reason for a failing burner. Ensure that the valves are in the “off” position on a gas stove and if it is an electric stove, unplug it.
You can also call Factory Appliance Houston specialists for more major issues.