Washing Machine and Dryer Repair
Today, numerous property holders can’t envision living without their washer and dryer. They often use them to keep all of their garments spotless and ready to wear without the need to visit a Laundromat. While washers and dryers intended to be as strong as conceivable, there is a wide range of things that could turn out badly.
Washer Machine Problems and Repairs
Washer machines have plenty of parts that need to work effectively for the garments to get perfect as well as to get as dry as possible before they go into the dryer. Washers should have the option to drench the garments, unsettle them to get as much dirt off as could reasonably be expected, and at that point turn them dry. A couple of the most widely recognized issues with a washer machine include the following:
Washer Won't Spin
The most common reason for an appliance to not spin is that the lid switch assembly is no longer functioning. If the switch does not lock, for safety reasons, the washer will not spin at all. Replacing this switch is the solution.
Washer Won't Drain
The drain pump can clog, causing the machine to stop draining properly. Cleaning out the drain pump or replacement is the solution and allows the washer to flow correctly again.
Washer Overflows
The water inlet valve typically causes a washer overflowing, or the pressure switch fails to work correctly. We can work it out to prevent the appliance from flooding again.
Dryer Problems and Repairs
Dryer Isn't Getting Clothes Dry in One Load
This is one of the most common problems for a washer, and the main problem is that the vent is clogged. Failure to repair it will not only lead to wet clothes but fire as well. The lint trap should be cleaned out manually on a scheduled basis, and the vent on an annual basis.
Dryer Drum Isn't Spinning
If the dryer turns on and gets hot, but the drum doesn’t spin, the clothes won’t get dry quickly. The common cause of this is a breaking belt. A technician can fix it and make sure
it is working.
Dryer Isn't Turning On
This is because there is no supply of power to the dryer. It may be as a result of burnt fuse, loose connections, or a bad start switch.
Keeping the lint trap clean and contacting a professional will help keep the dryer in great shape, so the homeowner doesn’t have to worry about finding another way to dry their clothes.
Problems with your washer and dryer don’t mean you need to start saving for new appliances or start loading the car to take your clothes to a Laundromat. Instead, you can have your washer or dryer fixed as quickly as possible by contacting the factory appliance today. We will help you save money and make sure you can keep your clothes clean again.
Need help in the Houston, Sugar Land or Katy area? Contact us today.
Where service is our best product
Sales, service, repair & install and major brands.
Ready to get started?
Repair or Install a device today.
Factory Appliance Service LLC
11160 Dover St. Suite B-3
Houston Texas 77031
OFFICE: 713-270-8879 FAX: 832-672-4524
Call
Address
11160 Dover St. Suite B-3 Houston Texas 77031